Dongyang EPP is the abbreviation of expanded polypropylene, a new type of foam plastic. EPP material has higher mechanical strength and a wider range of application scenarios, and has become one of the fastest-growing environmentally friendly materials.

Dongyang EPS is polystyrene foam, which is a light polymer. It uses polystyrene resin to add foaming agent, and at the same time, it is heated to soften to produce gas, forming a rigid closed cell structure of foam plastic.

EPE， It refers to foamed polyethylene, commonly known as pearl cotton. It is a new type of environmentally friendly packaging material. It is composed of countless independent bubbles generated by physical foaming of low-density polyethylene grease. It can be extruded or foamed into shape, and can be made into sheets or pipes, which can then be stamped, cut, and bonded into shape. It has good toughness, is not easy to break, and has good cushioning performance

EPS packaging is very common in people's daily lives and work, such as takeaway snacks, vegetable preservation, fruit storage, and express transportation packaging. This type of packaging is not only loved by consumers, but also by manufacturers and enterprises. Today, let's talk about the characteristics of EPS packaging. .......

Epp foam box mold locking device. The complete liquid reaction injection system is composed of four locking devices, and the four decomposition actions in one cycle are as follows: ① The locking mechanism fixes two half molds together, rotates 90 °, and releases gas through the parting surface.

With the increasing awareness of environmental protection among people, various automakers have become increasingly strict in controlling the air quality inside vehicles, which has put forward higher requirements for non-metallic materials used in car interiors.

With the rapid development of the domestic and international automotive industry, modern cars have increasingly high requirements for vehicle lightweighting and indoor air quality. Replacing metal products with non-metallic ones has always been an important means of reducing weight in automobiles, which can effectively reduce vehicle fuel consumption, improve energy utilization, reduce automobile exhaust emissions, and thus reduce pollution.

The foam molding products of foam manufacturers are divided into three types: EPS foam, EPP packaging, and mold free foam products. The process of processing foam molding is also different. The processing of EPS foam and EPP packaging is the same, and the manufacturing process of mold free foam products is different. Today, the editor of the foam manufacturer will take you to know

The raw material used for EPP packaging material is foamed polypropylene. Compared with ordinary foam materials, foamed polypropylene has many advantages. And EPP packaging material is also the abbreviation of a new type of foam plastic.

EPP packaging material is the abbreviation of foamed polypropylene, which is the abbreviation of a new type of foam plastic.